Processor CPU Cooler Cooling Fan Thermal Grease VGA Compound Heatsink Plaster paste /CPU heat conduction paste

SKU: 32990507910

Descripción

This product has high heat conduction, high insulation, high temperature resistance, long-term exposure will not dry, not volatile, non-toxic, odorless, non-corrosive.

Product parameters:

Silicone content: about 0.5g/30g

Thermal conductivity: >0.965W/m_k

Temperature resistance: >0.262

Working temperature: -30~150°C

Ingredients:

Silicone compound: Silicone Compounds 50%

Carbon Compound: Carbon Compounds 20%

Metal Substance: Metal Oxide Compounds 30%

Computer repair essential product features:

* This product is a heat sink oil. It is a combination of thermal grease and thermal grease silicone organic compound. It has good adhesion and excellent heat dissipation.

* This product is packaged in a barrel for easy use and storage.

Scope of application:

The computer CPU, the graphics chip, the host pulls the north-south bridge chip and the heat dissipation of the high-power heating element.

Friendly Tip: Most ordinary thermal grease will appear "dry" or "harden" after being used for half a year or longer, which greatly affects the heat dissipation effect. Therefore, it is necessary to regularly clean and reapply the silicone grease to ensure that the system works stably for a long time.

◆ The effect of the thickness of the silicone grease on the heat dissipation (the CPU temperature fluctuates between 61-62 °C in the case of a proper amount of silicone grease; the CPU temperature fluctuates between 63-64 °C in the case of a large amount of silicone grease)

Theoretically speaking, under the premise of filling the gap between the CPUGPU and the surface of the heat sink, the thinner the thermal grease layer is, the better. In terms of thermal conductivity, the best silicon grease is better than the metal materials such as copper and aluminum. As mentioned above in the parameter of thermal conductivity, the thermal conductivity of copper is about 100 times higher than that of high-grade thermal grease.

In fact, many people are afraid that the silicone grease is not enough, and the N-silicone grease is applied. What will happen?

Let's do a simple test, use Arctic Alumina grease (Arctic aluminum), apply a proper amount at a time, and deliberately apply more. Test the CPU temperature in two cases (room temperature 28 degrees, E6600 (7500MHz), CNPS9700LED radiator , MARS P35 motherboard, CPU voltage 1.55V).

Tested with the EVEREST software's System Stability Test, which allows the CPU to operate at high loads and record temperature profiles.

It can be found that the effect of the thickness of the silicone layer on heat dissipation is still very obvious. From this test, there is a 2 °C gap between the two, which is bigger than we think.

Therefore, we emphasize again that the thinner the thermal grease layer, the better, while ensuring that the CPUGPU and the surface of the heat sink can be filled.

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Processor CPU Cooler Cooling Fan Thermal Grease VGA Compound Heatsink Plaster paste /CPU heat conduction paste”